SS304 PVC Excellent Flow Characteristics Plastic Butterfly Valve

• Media: Water
• Driving Mode: Manual
• Connection Form: Flange
• Structure: Butterfly
• Seal Form: Force Sealed
• Valve Stem: Handle
• Model NO.: KLBTV-Butterfly
• Work Pressure: Pn16 (UPVC) / Pn10 (Pph)
• Working Temperature: Medium Temperature (120°C<T<450°C)
• Material of Seal Surface: FPM or EPDM
• Valve Body: Plastic/Stainless
• Standard: DIN/ANSI/JIS
• Application: General
• Transport Package: 610*330*300
• Specification: DN200-8"
• Trademark: JEVETEC
• Origin: China

Product Description

Product Description

 

Detailed Photos

Product Parameters

Product Name:	Plastic butterfly valve	Seal Material:	EPDM/FPM
Brand:	JECETEC	Valve Ends:	Flange
Working Pressure:	PN10 or PN16	Part Number:	KLMBYC
Valve materials:	UPVC /PPH/CPVC/PVDF	Pipe standard:	DIN/ANSI/JIS

Q:How to install butterfly valve well?
A:Butterfly Valves should be installed between two pipe flanges. In dead end service, it is recommended they be installed between one pipe flange and a downstream companion flange, flange ring, or blind flange. The use of additional gaskets is not necessary and is not recommended.When installed between two existing flanges, the flanges should be separated to provide clearance on the face to face of the valve. This will prevent the valve sealing surfaces from distortion and from being damaged during installation. Pipe flanges should be clean and free of debris including old gasket material. A light coating of a lubricant such as "Non-Fluid Oil" applied to the flange sealing surface will aid in installation.Valves should be opened approximately 15º during installation. To prevent damage to the edge of the disc by the mating flanges, do not turn the disc to the fully open position during installation.